No, the structural bulkhead system is an integral part of the tank and cannot be modified or removed.
Tanks Frequently Asked Questions
Tanks FAQs
All Infiltrator tanks are certified by IAPMO and CSA the most recognized certification agencies for tank technology. Please check with your local health department prior to use to be sure.
No, IM-series and CM-series tanks can only be assembled by those who have been trained and authorized by Infiltrator Water Technologies to assemble IM-tanks.
Can Infiltrator tanks be pumped dry during pump-outs?
No, Infiltrator tanks can be installed using suitable native soil.
Infiltrator’s riser guidance document and a video are available on this website to provide specific design options for attaching a variety of commercially available risers manufactured by Infiltrator Water Technologies.
Infiltrator tanks can be installed with a minimum of 6" and a maximum of 48" of cover.
Infiltrator’s tank installation instructions outline when buoyancy control measures are required and are available on this website. If buoyancy control measures are determined to be necessary, the Infiltrator IM Series Septic Tank Buoyancy Control Guidance document is also available on this website and provide specific design options for anti-floatation measures.
Many installation requirements and options are governed by local codes instituted by the health department in your area. When in question, check with the local health department for specifics and follow their code instructions. Any design or installation questions not answered here can be directed to the Infiltrator Water Technologies’ Technical Services staff by calling 1-800-718-2754.