Find a Pro Contact Us NDSpro.net Where to Buy
Search Nav

Stakes

Raise the emitter above soil and anchor connected tubing in place with stakes. Available in a variety of configurations for tubing support, emitter assemblies with inlets, V stakes, and hook stakes, and made of plastic or galvanized steel.

Where to Buy
NDS 6 in. Stake with 1/4 in. Barbed Side Inlet and 10-32 Threaded Top Outlet (NDS S 5)
Where to Buy

Key Features

  • Lifts emitter attached to distribution tubing above soil and mulch
  • Secures distribution tubing and keeps it in. place
  • Keeps rigid riser in place and held upright
  • Stakes made of durable plastic treated with UV inhibitors or weather-resistant galvanized steel
  • Stakes available from 5 in. to 17 in. long

Applications

  • Anchors distribution tubing in place; lifts and supports emitter above soil for overhead irrigation and helps prevent clogging
  • Ideal for use in flower and vegetable gardens; around trees and shrubs, and container plants
  • As part of a complete drip irrigation system, the stake anchors distribution tubing in place and lifts the emitter for overhead irrigation

Installation & Maintenance

  • Position stake where desired by hand or carefully pound into ground with hammer
  • Periodically check for damage and replace as needed

Materials & Sustainability

  • Plastic stakes are made of Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking
  • Metal stakes are made of galvanized steel
  • Drip irrigation can reduce water usage by up to 70% compared to conventional sprinkler irrigation when used properly; for most drip irrigation products, water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Product Models

Filter results
Family
Color

7 products

    Part Number
    (click for more info)    		 Description
    S 8 1/2 in. Tubing Stake, 8 in., 12-Gauge Galvanized Steel, 100-Pack
    S 4 1/4 in. Tubing Hold-down Stake, 5 in., 14-Gauge Galvanized Steel, 100-Pack
    S 12 1/4 in. Tubing Support Stake, 12 in., Plastic, 200-Pack
    S 17 Snap-in Stake for Rigid Riser, 17 in., Plastic, 250-Pack
    S 14 Stabilizer Stake for Rigid Riser Jet Assemblies, 14 in., 11-Gauge Galvanized Steel, 50-Pack
    S 5 Stake with 1/4 in. Barbed Side Inlet and 10-32 Threaded Top Outlet, 5 in., Plastic, 200-Pack
    S 6 V Stake Fits 1/8 in. & 1/4 in. Tubing, 6 in., Plastic, 100-Pack

    Specifications & Documents