HP Storm Dual Wall Pipe
This high-performance polypropylene (PP) pipe is the perfect choice for gravity-flow storm drainage applications and when premium joint performance and/or greater pipe stiffness is required. It couples advanced polypropylene resin technology with a proven, dual wall profile design for superior performance and durability. The smooth interior wall offers additional strength as well as superior flow.
HP Storm stored in yard
HP Storm into rubber boot
HP Storm Smaller Diameter Slipline
INSERTA TEE into HP Storm
HP Storm Joint Dual Gasket
Killeen TX ISD HP Storm
Killeen TX HP Storm installation
HP Storm Fabricated Fitting
HP Storm Stack to be Installed
HP Storm Joint Lubication
HP Storm length one gasket
Mission Rubber connecting HP Storm
HP Storm Stick
HP Storm Pipe Interior Shot
HP Storm Stacked on Site
HP Storm Culvert under dump truck
HP Storm with Rain
Documentation
101D Trench Installation (HP Storm Pipe) Detail
101E Trench Installation Alternate (HP Storm) Detail
101H Trench Installation Aircraft (HP Storm) Detail
111D Minimum Cover Temporary Single Axle HP Pipe Detail
111E Minimum Cover Temporary Tandem Axle HP Pipe Detail
111F Minimum Cover Temporary Tracked Axle HP Pipe Detail
111G Aircraft Landing Gear Footprint (HP Storm) Detail
206A 12-60 HP Storm MH Grouted Waterstop Detail
206B 12-30 HP Storm MH Waterstop Cast-in-Place Detail
206C 30-60 HP Storm Triplewall MH Waterstop Cast-in-Place Detail
206D 30-60 HP Storm Triplewall MH Grouted Waterstop Detail
207A 12-30 HP Storm Compression (Cast-in) Structure Connection with Sleeve or PVC Adapter Detail
207B 12-60 HP Storm Booted (Cored or Cast Hole) Structure Connection with Corr Pipe Adapter Gasket Detail
207C 12-30 HP Storm Booted (Cast-in) Structure Connection with Corr Pipe Adapter Gasket Detail
207D 12-30 HP Storm Booted (Cored or Cast Hole) Structure Connection with Sleeve or PVC Adapter Detail
207E 12-30 HP Storm Booted (Cast-in) Structure Connection with Sleeve or PVC Adapter Detail
406 Installation HP Storm Riser Tee 12-24in Pipe Detail
407 Installation HP Storm Riser Tee 30-60in Pipe Detail
604A HP Storm to RCP Connection (MarMac) Detail
HP Storm Couplers Fittings Manual
HP Storm Manifolds Fittings Manual
TN 2.04 Minimum Maximum Cover Heights for HP Storm for Storm Drainage
TN 2.04A Minimum Maximum Cover Heights for Alternate Trench for HP Storm Pipe Trench
TN 4.02 Chemical Resistance of Polypropylene and Elastomers
TN 5.02 Flowable Fill Backfill for Thermoplastic Pipe
TN 5.04 HDPE and HP Storm Connections to Manholes and Structures
Additional Resources
Overview
HP Storm offers up to 100 percent greater pipe stiffness over traditional plastic pipe, which increases safety and service life in installations that demand high performance. The extended bell and spigot joint design adds an additional factor of safety within each joint to ensure watertight performance and long term design service life.
HP Storm pipe meets or exceeds ASTM F2881 and AASHTO M330. From a federal perspective, polypropylene (PP) pipe is approved for use by the Army Corps of Engineers for storm drainage applications under Section 33 40 00 (Unified Facilities Guide Specifications). The Federal Aviation Authority (FAA) permits polypropylene pipe under airfield pavements per Item D-701 and as pipe for storm drains and culverts in AC 150/5370-10G (Standards for Specifying Construction of Airports). Additionally, the American Railway Engineering and Maintenance-of-Way Association (AREMA) approves polypropylene pipe in storm drainage applications under railroads.
Features and Benefits
- Increased stiffness results in an additional safety factor against construction loading and poor installations
- The extended bell and spigot joint meets ASTM D3212 and ensures lab and field testable watertight performance
- Smooth interior with a Manning's value of 0.012, resulting in increased flow capacity
- Inert PP material is resistant to the effects of chemicals, abrasion, hot soils, and effluent
- Lightweight product for best installed cost to maximize delivery and installation efficiencies
- Readily available in convenient locations to service local projects
Build America, Buy America (BABA) Act
ADS HP Storm pipe, manufactured in accordance with ASTM F2881 or AASHTO M330, complies with the requirements in the Build America, Buy America (BABA) Act.
Product Specifications
| HP Storm Pipe | |
|---|---|
| Lengths Available | 20' (6m)* |
| Joint Performance | Water Tight (ASTM D3212) |
| Joining System | Extended Reinforced Integral Bell & Gasketed Spigot |
| Specifications | AASHTO M330 12"-60" (300mm-1500mm), ASTM F2881 12"-60" (300mm-1500mm) |
| Design Service Life | Minimum 100 Year |