1300 SaniTite HP Standard Details
Filename:
1300 SaniTite HP Standard Details.dwg
This document is the 1300 SaniTite HP Standard Details. Various diagrams of installation, manhole connections, Inserta Tee and pipes shown.
The following is a list of the products and process details featured in the diagrams.
SaniTite HP Trench Installation Detail.
Alternate Pre-Cast Manhole Connection with SaniTite HP Pipe.
Compression (Cast-In) Resilient Structure Connection 12”-30” Dual Wall SaniTite HP w/Sleeve or Nyloplast PVC MH Adapter.
Compression (Cast-In) Resilient Structure Connection 30”-60” Triple Wall SaniTite HP.
12”-24” SaniTite HP Outside Drop Manhole.
30”-60” SaniTite HP Outside Drop Manhole.
Inserta Tee installation.
Access MH Detail with SaniTite Pipe.
Booted (Cored or Cast Hole) Resilient Structure Connection 12”-30” Dual Wall SaniTite HP w/Sleeve or Nyloplast PVC MH Adapter.
Booted (Cast-In) Resilient Structure Connection 12”-30” Dual Wall SaniTite HP w/Sleeve or Nyloplast PVC MH Adapter.
Booted (Cored or Cast Hole) Resilient Structure Connection 30”-60” Triple Wall SaniTite HP.
A section on post installation testing states that when deflection testing for allowable deflection limits, the minimum specified inside diameter should be used when establishing mandrel sizing. Table 1 SaniTite HP recommended Mandrel Settings and Table 2, Time for Pressure Drop for SaniTite HP are provided.
For Leakage testing, SaniTite HP may be tested with ASTM F1417.