Canada N-12 ST CSA B182.8 or BNQ 3624-120 Product Sheet

Canada N-12 ST CSA B182.8 or BNQ 3624-120 Product Sheet.pdf

Canada N-12 ST CSA B182.8 or BNQ 3624-120 Product Sheet

The N-12® ST IB pipe (per CSA B182.8) sell sheet explains the applications, features and benefits, and gives the specifications for the pipe. N-12 ST IB pipe contains a superior built-in bell-and-spigot joint. The joints are sealed by high-quality, factory-installed gaskets that meet all ASTM F477 requirements.

N-12 ST IB pipe (per CSA B182.8) is used for storm sewers, culverts & cross drains, waterways, grain aeration, golf, turf & recreation, ditch enclosures, slope & edge drains, foundation drains, land reclamation, and mining, forestry, industrial uses.

Features of the N-12 ST IB pipe include it is available in 6 m (20’) lengths which result in fewer joints, 100-1500 mm (4”-6”) diameters are available, it is certified to meet CSA B182.8, Type 2, silt tight joint performance requirements.

The benefits are that the bell-spigot joint offers quick & easy installation, the easy-to-handle, lightweight pipe requires less labour & equipment for fast installation and reduced costs. The superior hydraulics with a smooth interior wall ensures no debris or sediment builds up. N-12 ST IB pipe provides superior resistance to chemicals, road salts, oil & gasoline - it will not rust or deteriorate. The pipe withstands repeated freeze and thaw cycles & continuous sub-zero temperatures.

This document includes specifications for the Canada N-12 ST IB pipe (per CSA B182.8), including the scope. The specification describes 100 to 1500 mm (4”-60”) ADS Canada N-12 ST IB (per CSA B182.8) pipe for use in gravity-flow drainage applications. The specification includes information about the pipe requirements, joint performance, material properties, and installation.

For complete installation guidelines for Canada N-12 ST IB pipe (per CSA B182.8), follow CSA B182.11 published installation guidelines. Backfill for minimum cover situations shall consist of Class 1, Class 2 (minimum 90% SPD) or Class 3 (minimum 95% SPD) material. Maximum fill heights depend on embedment material and compaction level; please refer to Technical Note 2.01C.

Looking for something else?

View Document Library
Microsoft will be phasing out Internet Explorer soon. Because of this, we did not build the site to be used with IE. Please use Chrome, Edge or another browser to fully experience the new ADS website. .