This document is the StormTech Inserta Tee Side Inlet. A cross section and measurement chart with notes included.

The Inserta-TEE cross section shows the conveyance pipe with varying material, the Inserta-TEE connection and placement of ADSPLUS woven geotextile over bedding stone. The side view shows the Inserta-Tee to be installed, centered over corrugation. Do not install Inserta-Tee at chamber joints.

A chart shows the different chamber models and their corresponding maximum diameter of Inserta-TEE and the height from base of chamber. Inserta-TEE fittings for certain models listed.

Notes relate that part numbers will vary based on inlet pipe materials. Also, to contact ADS engineering services if Inserta-TEE inlet must be raised.